General Description Drilling Gilsonite Fluid Loss Control (FLC) is an effective solution for minimizing fluid loss and enhancing wellbore stability during challenging drilling operations. Gilsonite is used in drilling fluid loss control (FLC) and oil well cementing. Gilsonite, in a range of softening points and particle sizes, is a standard ingredient in oil-based drilling muds […]
Natural Amorphous Graphite The term “amorphous graphite” is a contradiction in terms All graphite is crystalline by definition, therefore it is impossible for graphite to be amorphous. However, the term was applied due the anhedral (no visible crystallinity) morphology of this form of graphite. To the untrained eye a piece of amorphous graphite simply looks […]
Gilsonite Deep Water Drilling Gilsonite in Deep Water Drilling has been proven safe and effective in more than 60 years of oilfield performance. Gilsonite is a safe, naturally occurring hydrocarbon resin with unique chemical properties. Added to drilling fluids, it increases performance and reduces cost in deepwater drilling while minimizing risk. Gilsonite Prevents Differential […]
Gilsonite in Water Based Drilling Muds (WBM) It is essential in water-based mud to use an additive that can resolve in water. Gilsonite is not solvable in water by nature. Therefore a chemical procedure with Sulfur must be applied to the natural bitumen at a temperature between 100-140 degrees Celsius. This process is called Sulfonating […]
Gilsonite Performs in (WBM) a cost-effective, high-performance drilling fluid additive, effective in a wide range of water-based systems for both low and high-temperature wells. Gilsonite is a free-flowing powder that mixes easily through the hopper and disperses with only mild agitation. It is tolerant of contaminants and eliminates the need for additional surfactants or coupling agents. […]
Oil-based drilling muds (OBM) are invert emulsions: brine droplets suspended in a continuous oil phase. They are the system of choice for reactive shale, high-angle wells and high-temperature sections, because the oil phase does not hydrate clay and remains stable where a water-based mud would fail. This page explains how oil-based drilling muds are formulated, […]
General abstract Gilsonite Cement Additive Since Gilsonite, a solid hydrocarbon, was Introduced to the Oil Industry in August 1957 as a cement additive, over 200 jobs have been performed using the material. Designed primarily as a combination low-density, lost-circulation slurry, Gilsonite cement additive has yielded excellent results In areas of incompetent formations as well as […]
Introduction Gilsonite is a natural hydrocarbon resin, otherwise known as natural bitumen, and is well respected across the oil and gas industry. Due to its unique properties, it plays a critical role in both drilling fluids and cementing operations, significantly improving efficiency, wellbore stability, and overall well integrity. Gilsonite in Drilling Fluids Gilsonite has been […]
General Definition natural asphalt used in oilfields as a fluid loss additive in drilling fluids. As an integral component of premium drilling fluid products, Gilsonite actively improves drilling efficiencies while reducing costs and minimizing the HSE impact associated with most drilling fluid additives. Gilsonite in the oil and gas industry, drilling muds or fluids perform […]
General description Gilsonite in Cementing is suitable for blocking or plugging an abandoned pipeline or backfilling a mine shaft, tunnel or excavations contains Portland cement or a mixture of at least two components selected from Portland cement, A cementitious slurry, formulated from the cement mix, may have a density less than or equal to 1500 […]
