Oxidized Bitumen 95/25

Description of Oxidized Bitumen 95/25

Oxidized Bitumen 95/25 is based on petroleum bitumen which is made by Blowing Grade 60/70 bitumen by hot air.

Blown Asphalt 95/25 is the semi-solid oxidized grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business. The softening point value measured by Ring and Ball method as determined by ASTM D36. Also, the penetration value is in 1/10 mm as determined by IP49 or ASTM- D5. Oxidized bitumen has a higher softening point than viscosity grade and penetration bitumen. Consequently, oxidized bitumen is less susceptible than penetration bitumen and viscosity bitumen to temperature changes.

Our sales team is committed who understands your requirements due to many years of experience in supplying bitumen products.
If you are more interested in product information or need to place an order contact or inquire our Sales team.

Uses of Blown Asphalt 95/25

his kind of bitumen is suitable to be used in the chemical, raw material for bitumen coat, paper-pulp-board, textile processing, pavement, crack seal and repairmen, civil works, bitumen coat for piping, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, road construction, dust-binding, insulating and impregnating agent, isolation bitumen membrane sheet, make rubber and plastic products.

Advantages of Oxidized Bitumen 95/25

  • Durability
  • Flexibility
  • Water Resistant
  • Chemical Stability

Storage and Handling of Bitumen 95/25

Oxidized Asphalt 95/25 is best up to 10 years from the day it was manufactured. It is suggested for higher time of warehouse keeping to keep the bitumen under shelter and out of the rain and sun shine. Please refer to MSDS for more information.

Health & Safety of Oxidized Asphalt 95/25

Workers should wear protective masks, gloves, and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.

Packing of Oxidized Bitumen 95/25

Blown Asphalt 95/25 in various packing, including bitumen 95/25 is available in 20 & 50 Kg Kraft Paper Bags 25 Kg Carton box & 150, 180, 200 Kg Steel Drums:

25kg carton box

25kg mold packing:

It is most expensive packing since there is mold on and with same mold we can ship out. The mold is carton and at destination you can remove the mold easily.

25Kg Polyamide bag:

It is heat resistance bag and filling directly in water to cool down fast. It is firstly use not possible to take out the Polyamide from the bitumen and then use.

25kg craft bag:

Craft bag is recycle packing and inside is special material to prevent sticking the bitumen to bag. This grade also possible to load on pallet or without pallet for customer.

Specification of Oxidized Bitumen 95/25

TEST SPECIFICATION STANDARD RANGE TEST METHOD
Specific gravity @25/25 C 1.05 approx. D-70
Penetration @25C 20/30 D-5
Softening point C 90/100 D-36
Ductility@25C 1.5min D-113
Loss on heating (wt)% 0.2max D-6
Flash point C 260min D-92
Solubility in CS2 (wt)% 99min D-4
Specific gravity @25/25 C 1.05 approx. D-70

Leave a Reply

Your email address will not be published. Required fields are marked *