Description Cutback Bitumen RC-30 is dissolved of bitumen in solvents of gasoline. In many countries, kerosene and other volatile petroleum-derived products are added as a cutter or cutback agent to bitumen to reduce (or cutback) the viscosity of the bitumen. he reduction in viscosity of the bitumen aids the construction of seal coats in road […]
Description Anionic bitumen emulsion SS-1h is a slow-setting anionic asphalt emulsion (i.e., low reactivity) low viscosity and a hard asphalt residue that is designed for various paving and industrial uses. Asphalt emulsions are classified according to the electric charge that surrounds the emulsion’s asphalt particles (i.e. whether it is a cationic or an anionic emulsion) […]
Description of Bitumen Emulsion Anionic SS-1 Anionic Bitumen Emulsion SS-1 is a slow-setting anionic asphalt emulsion (i.e., low reactivity) low viscosity, and a hard asphalt residue that is designed for various paving and industrial uses. Asphalt emulsions are classified according to the electric charge that surrounds the emulsion’s asphalt particles (i.e. whether it is a […]
General description of Cationic Bitumen Emulsion K3 Bitumen Emulsion K3 is a cationic emulsion that contains 57% bitumen. In fact, K3 is a cationic medium setting emulsion as per British standards and it’s suitable for premix – carpet and pothole repair. Asphalt emulsion is chocolate brown in color and is a free-flowing liquid at ambient […]
General Description of Bitumen Emulsion K2 Bitumen Emulsion K2 is a cationic emulsion that contains 57% bitumen. In fact, K2 is a cationic medium setting emulsion as per British standards and it’s suitable for premix – carpet and pothole repair. Asphalt emulsion K2 is chocolate brown in color and is a free-flowing liquid at ambient […]
Bitumen Emulsion K 1-70 Description Bitumen Emulsion K1-70 is made up of three basic ingredients which include Bitumen, an emulsifying agent, and water. It is a well-known fact that asphalt and water will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. Bitumen Emulsion is made up of three basic […]
Description of Bitumen Emulsion K1-60 Bitumen Emulsion K1-60 This product is water-based, ready to use, conforms to the requirements of BS 434: Part 1, and is applied in accordance with BS434:Part 2. Bitumen Emulsion K1-60 is a rapid setting cationic bitumen emulsion is an emulsified asphalt containing minimum 57% bitumen. It is a medium viscosity emulsion […]
Description of Bitumen Emulsion K1-40 Bitumen Emulsion K1-40 are cold applied, liquid bitumen emulsions, used in the construction and repair of pavements, driveways, roads, and highways. In accordance with these standards, This product is denoted by the prefix ‘K’ signifying a cationic emulsion. This product is water-based, ready to use, conforms to the requirements of BS […]
Description Bitumen Emulsion CRS-2 is a specially designed water-based Bitumen Emulsion with high viscosity and fast setting that makes it an ideal product for Tack Coat spray application but one of the main applications of CRS emulsion is surface treatment (Chip seal, sand seal, and fog seal by cement curing). CRS-2 is a cationic rapid-setting […]
Description Cationic Bitumen Emulsion CRS-1 is primarily used as a tack coat. The emulsion is used as a tack coat (either as is or diluted 50% with water) or fog seal (diluted 50% with water) and applied with a distributor. Bitumen Emulsion CRS-1 is a rapid-setting cationic asphalt emulsion that reacts quickly with aggregate to […]
